English

Fire Hose

Use and maintenance of fire hose: 1. Before the hose is connected, the fire hose needs to be placed on the hose interface, coated with a layer of soft protection, and then knotted tightly with galvanized iron wire or hose hoop. 2. using a hose. When using a fire hose, it is best to attach the high pressure resistant hose to a location near the water pump. After filling, keep the water hose from twisting or suddenly bending, and guard against collisions that could harm the hose interface. 3. Laying hoses. Avoid using sharp objects and different oils when laying the hose. Use the hose hook to lay the hose vertically to a high point. To avoid being crushed by the wheels and cutting off the water supply, the hose should run under the track as it is moving. 4. Keep from freezing. The water pump must run slowly to maintain a limited water output during the harsh winter months when the water supply must be suspended at the fire site to prevent the hose from freezing. 5. tidy up the hose. The hose needs to be cleaned after use. To preserve the glue layer, the hose used to transport foam needs to be meticulously cleansed. The hose can be cleaned with warm water and soap to get rid of the oil on it. The frozen hose needs to be melted first, then cleaned, and then dried. The un-dried hose shouldn't be wrapped up and kept in storage.

Application

Underground pipeline

Underground pipeline

Irrigation System

Irrigation System

Water Supply System

Water Supply System

Equipment supplies

Equipment supplies