Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Polyethylene Compression Ftting, Ppr Pipe 20mm, Saddle Clamp Hdpe, We give priority to quality and customer pleasure and for this we follow stringent excellent control measures. We've got in-house testing facilities where our items are tested on every single aspect at different processing stages. Owning to latest technologies, we facilitate our clients with custom made creation facility.
Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek Detail:

WHAT IS THE HDPE PIPE?

HDPE Pipe, Polyethylene (PE Pipe) are sorted by strength classified according to the intensity of the earlier technological developments. HDPE Pipe pressure classes that can be made between Pn4-Pn32 and the production of the desired diameter and size of HDPE pressure pipe system has undergone many tests in 1950, particularly in the carriage of drinking water. After the result of these tests of HDPE Pipe, if all reports are positive then it has no harmful effect on human life. One of today’s most widely used pipe is HDPE piping systems which is  economical, easy in handling, efficient  performance, easy method of coupling. Is quite useful and is produced by PNTEK

RAW MATERIAL OF POLYETHYLENE PIPE

Polyethylene Pipe, Pe 32 class is developed in 1950 with improving technology  and low density. 3rd Generation PE 100 Polyethylene raw materials  are used in drinking water pipelines, desalination plants, biological treatment plants, swimming pool piping, sea discharge lines, gravity flow water lines, gas stations , irrigation lines, compressed air lines, cooling-heating lines, pre-insulated sheathing for pipes. Because Low Density Polyethylene Pipe is economical and has high-performance in many areas, such as sewer lines has been a solution. (C2H4) has the general formula of crude oil of 97% polyethylene and is a thermoplastic polymer as shown. The production of raw materials, entirely depends on the availability and price of crude oil. Polyethylene density  is divided into three main groups according to their crystalline structure percent.
• Low density polyethylene raw material (LDPE)
• Medium density polyethylene raw materials (MDPE)
• High density polyethylene raw materials (HDPE)

HDPE  PIPE AND FITTINGS

1.Nontoxic:
PE pipe material nontoxic, tasteless,it belongs to green building materials, never scaling,
which can effectively improve the water quality.
2.Corrosion resistance:
High resistance to attack from various types of chemicals. No electrochemical corrosion.
3.No Leakage:
PE pipe is connected in the ways of butt fusion, socket fusion and electrofusion and the
strength of joint point is higher than tube itself .
4.higher flow capacity:
The Smooth inner wall is easy for pipeline transportation .Under the same condition
delivery capacity can be increased by 30%.
5.Convenient for construction and installation:
PE pipe could be installed in a variety of trenchless ways, so it is very convenient for
construction and installation.
6.Lower system and maintenance costs:
PE pipe is not only convenient to transport and install, but also  reduce the worker’s
labor intensity and improve work efficiency.
7.Longevity:
50 years under pressure use.
8. Recycled and Environment-friendly


Product detail pictures:

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures

Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek detail pictures


Related Product Guide:

Our pursuit and enterprise goal is to "Always satisfy our customer requirements". We keep on to establish and style and design outstanding top quality goods for both our outdated and new prospects and realize a win-win prospect for our clientele likewise as us for Factory making Poly Pipe End Caps - Hdpe Buttfusion Stub End – Pntek , The product will supply to all over the world, such as: Uruguay, kazan, Armenia, As a well educated, innovative and energetic staff,we are responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we are not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and provide instant communication. You will instantly feel our expertise and attentive service.
  • The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Carol from venezuela - 2017.09.28 18:29
    The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
    5 Stars By Denise from Bolivia - 2017.11.01 17:04
    Write your message here and send it to us

    Application

    Underground pipeline

    Underground pipeline

    Irrigation System

    Irrigation System

    Water Supply System

    Water Supply System

    Equipment supplies

    Equipment supplies